Product Description
Aluminium Reducing Link
For stranded sector and circular stranded aluminium conductor.
The aluminium reducing link range is barrier type, so they can be used in any situation where an impermeable barrier to oils or water is required. A standard range is available however, we can produce any link - imperial, metric or any combination that you may require.
These links and any special links are designed to be crimped with standard Australian tooling, using standard hex dies. Do not crimp close to the centre barrier or the link may shear.
Standards and Compliance
AS/NZS4325 Part 1, IEC France, DIN/VDE Germany, JIS Japan, BS United Kingdom, UL/NEMA USA.
Technical Data
Nominal Conductor (mm2): 35/10
Stranding Metric: 19/1.53-7/1.35
K (mm): 32
M (mm): 4.50
Large End - Larger Conductor
A/F Hex (mm): 9.0
No. of Crimps: 1
Dimensions(mm)
A: 80 B: 32 D: 8.50
Crimp Die Aluminium: HT-6/35AL
Small End - Smaller Conductor
Crimp Die Aluminium: HT-6/35AL
A/F Hex (mm): 9.0
No. of Crimps: 1
Conductive Material
Aluminium 99.6% pure
Tensile Strength 110 MPa
Ductile Strength 28%
Final Metal State Fully Annealed
Electrical Properties
Resistivity 2.6 micro-ohm cm (max)
Conductivity 61.8% IACS (min)
Operating Temperature
-20 to +140 deg C
Additional information
| Material Group | DC |
|---|---|
| EAN | |
| Brand | |
| For Bulk Orders Please Call: | |
| Type | |
| Supplier | Cabac |
