High performance 2 channel PIR presence detector for lighting or HVAC control, ceiling mounted with 360-degree range and large detection zone
Off delay settings: CH 1 (lighting) 5 sec to 30 min, CH 2 (HVAC) 10 sec to 60min
30m detection zone, supports up to 10 slaves to extend range even further
Recessed or surface mount with junction box included
Optional IR remote control - part number CPD-P-RC
Product Description
The CPD-360P is a passive infrared (PIR) ceiling mountable presence detector designed for lighting or HVAC automation control.
Occupancy sensors provide an efficient reduction in energy usage by only running lighting when it's needed. When the area is unoccupied, the device conserves
energy by switching off the lights after the pre-set auto off time has elapsed. Manual control and automatic or semi-automatic control are enabled by using the
external push button switch.
This presence detector has a 30-metre detection zone and coverage can be extended even further by using a slave device (part number CPD-360P-SLAVE). Up to 10
slave units can be attached to each CPD-360P, refer to the product datasheet for a visual diagram of the detection coverage that this system provides.
The CPD-360P is suitable for halogen, fluorescent and LED lighting, and features impulse mode for switching a staircase timer. The device has a 360-degree detection
angle with a detection lens shield to allow for the angle to be adjusted. Suitable for flush mounting or surface mounting with the included junction box.
Operating Specifications and Technical Data
Lux Setting: 10Lux to 2000Lux
Auto Off Time
Time 1 for lighting: 5 seconds to 30 minutes
Time 2 for HVAC: 10 seconds - 60 minutes
Operating Temperature: -20 to +45 degrees Celsius
Environmental Protection: IP40, IP54 with included junction box
Detection angle: 360 degrees
Detection range: Diameter 30m
Electrical Data
Rated Voltage: 220 - 240V ~ 50/60HZ
Load
Load I (CH1) for Lighting:
Incandescent Lamp: max. 2000W
AC Halogen Lamp: max. 1000W
LV Halogen Lamp: max. 1000VA/600W (traditional)
LV Halogen Lamp: max. 1000VA/900W (electronics)
Fluorescent Lamp: max. 900VA/100uF
25 x (1 x 18W)
12 x (2 x 18W)
15 x (1 x 36W)
7 x (2 x 36W)
10 x (1 x 58W)
5 x (2 x 58W)
max. 1000VA/600W (uncompensated)
LED Lamp: max. 500VA/400W
Energy Saving Lamp: max. 600VA/400W (include CFL and PL Lamp)
Load II (CH2) for HVAC (voltage free contact):
max. 5A (cos = 1) for 250VAC
max. 5A for 30VDC
max. 1A (cos = 0.4) for 250VAC
Technical Specifications
Detection Range (m): 30
Number of Channels: 2
Mounting Type: Surface, Ceiling
Surface Mount: No
Ceiling Mount: No
Lamp Compatibility: Incandescent, Halogen, Fluoroscent, LED, Energy Saving
Additional information
| Material Group | OB |
|---|---|
| EAN | |
| Brand | |
| Type |
