CABAC AC Weatherproof Sunset Outdoor Light Sensor Timer ECO Switch 16A HSC110SS

Weatherproof Sunset Switch

The Sunset Switch is used to switch outdoors lights (or indoors light when applicable) off when they are not required in daylight.

In its most basic form, the unit senses outdoors light level and switches a relay on and off, thus turning the lights wired to it on or off. Traditionally the lights would turn on during sunset, therefore it is commonly known as a Sunset Switch.

Unlike other models on the market, the Sunset Switch features more than 1 mode of operation. In fact this switch has been upgraded from a 3 in 1 device to a 4 in 1 device that incorporates 4 different programmed switching modes/sequences.

Mode 1 | Standard mode:

Traditional dusk ’til dawn switching – turns lights on and off when a set level of ambient light is reached.

Mode 2 | Timer mode:

‘OFF’ time after sunset can be set by the installer (useful when the lights are only required to turn on during the 1st part of the night).

Mode 3 | ECO mode (patent pending):

Turns off for a period of up to 35% of the night, adapting and adjusting with the seasons. The unit will turn on for 50% of the length of night then turns off for up to 35% of the night and then turns back on until dawn. This is most useful when returning and leaving home at the beginning of the evening and the dark hours of the morning. This mode provides direct savings as the light is turned off during the night when it is not needed.

Mode 4 | Real Time mode:

Real Time mode allows the selection of a desired turn OFF time for the power every night. In real time mode the power will turn ON at dusk and will turn OFF consistently at the same desired time every night.

Note: More detailed information (including diagrams and charts) is available, see Technical Data.

Weatherproof Sunset Switch Features

• 16A upgrade of the HSC110SS Sunset Switch*

• 4 in 1 patented design

• Easy mode and timer programming using internal DIP switches

• Can be programmed to turn off at a fixed time every day – Real Time mode*

• Industry compatible form factor suitable for retrofitting to HPM base

• IP rated product for worry free outdoor installations

• Heavy-duty brass terminals

• Max rated load 3840W (incandescent and PCB)*

• 15 minute step timer range, up to 15.75 hours (or day break)

• All required parts are supplied including glands and DIP switch tool

• Quick installation with a short warm up time

• Higher power relay – fewer units are needed to control more lights

• Descriptive internal label for easy installation and set-up

• Turn ON/OFF delay stops inadvertent switches

* Product upgrade feature.

This product has been designed, engineered and manufactured in Australia by Hendon Semiconductors, a member of the Legend Corporation group.

Technical Data

Operating Voltage 220-240V a.c. 50Hz Certified Standard CISPR15, AS/NZS 61347.2.11 Ingress Protection IP66 (when all used and unused entries are sealed) Max Load 3840W incandescent, halogen

3840VA fluorescent Min Load 0W Maximum Current Capacity 16A Light Switching Level ON – 25 Lux, OFF – 50 Lux Turn ON/OFF Delay 1 minute Timer Steps 30 minutes Delay Timer Range: 30 minutes – 15.5 hours Operating Temperature 0 – +50°C

Note: Not suitable to be driven by DC-AC Inverter.

Ordering Information
Part No. HSC110SS