The MT474 is IP64 and is a useful tester designed to meet electrician’s requirements for a multitude of applications. The tester displays the voltage on red LED’s which increment as the voltage increases. There is an LED indication for polarity when DCV is measured. No switching of the meter on as the tester automatically turns on when voltage is applied to the two test probes. The MT474 incorporates a Low Impedance Test, which induces a basic load of approximately 6kΩ at 690 volts. The voltage tester can show the direction of the rotating field with three-phase systems, with the direction of field shown as L = anticlockwise and R = clockwise. The tester can be used as a Single Pole phase tester and measure continuity up to 200kΩ. The MT474 meets the CAT IV 600V and CAT III 1000V safety standards.
CAT IV 600V and CAT III 1000V
IP64 waterproof housing
AC & DC Voltage detection from 12V to 690V AC and DC
Phase Rotation
LED display
Single pole phase test set
Low Impedance test
Built-in Flashlight
Polarity Detection
Rotary Field indication
Continuity test to 200kΩ
SPECIFICATIONS
*Function: DC Voltage Range: 12 – 690V Accuracy: ±(30%)
*Function: AC Voltage Range: 12 – 690V Accuracy: ±(30%)
*Function: Rotary Field Range: 100 – 690V AC
*Function: RCD Test Range: 10mA/30mA
*Function: Continuity Range: Yes
*Function: AC Bandwidth Range: 50Hz – 60Hz
*Function: Digital Display Range: LED Indication
*Function: Polarity Indication Range: Yes
*Function: Overrange Indication Range: Yes
*Function: Low Input Impedance Range: <200kΩ *Function: Flashlight Range: Yes *Function: Enclosure Range: Double injection IP64 *Function: Batteries Range: 2 x AAA *Function: Weight Range: 255g Accessories:
Test probe covers for CAT IV 600V
2 x AAA Batteries
Instruction Manual
Additional information
| Brand |
|---|
