The MT403 is a Non-Contact AC Voltage detector with dual ranges, a low measuring range down to 12 volts and a high measuring range from 12V to 1000V. Suitable for outlets or against wire insulation testing, this non-contact AC Voltage Detector has a switch to turn the unit on and a Green LED indicates it is working. There is a Red LED and an audible sound to indicate the presence of voltage. It has a rugged double moulded IP67 waterproof housing that can withstand a 2m drop. There is a bright built-in LED flashlight ideal for use in dimly lit areas.
CAT IV 1000V
IP67 waterproof and dust proof
12V to 1000V detection
Thinner probe tip for working with socket outlets
Green LED means Power on, flashing red LED with beeper means Voltage detected
Two modes, green indicates high voltage mode, Yellow LED 12V Mode
Flash and beep rate increases as the detector gets closer to the voltage.
Power On/Off with silent mode
2m drop-proof
Specifications:
*Function: Power On Indicator Range: Green LED
*Function: Flashlight Range: LED
*Function: Non-Contact Voltage (NCV) Range: Yes
*Function: AC Voltage Range: 12V ? 1000V
*Function: Frequency Range: 50/60Hz
*Function: Voltage Detector 100V -1000V Range: Red LED auditable beep
*Function: Voltage Detector 12V -1000V Range: Yellow then Red LED auditable beep
*Function: Voltage Detector Audible Range: Continuous Beep
*Function: Enclosure Range: Double moulded IP67 waterproof
*Function: Low Battery Indication Range: Beep 3 times, switch off
*Function: Batteries Range: 2 x AAA
*Function: Weight Range: 55g
Accessories:
2 x AAA Batteries
Instruction Manual